Retrievable Liner Top Packer

Designed for operation in conventional, extreme, high pressure and thermal environments up to 600 F, the Solace has been engineered for the most extreme deviated and undulated vertical and horizontal well applications.

The proprietary design offers full 360 degree tubing contact with ‘state of the art’ durability, pressure maintenance and hanging/compression capacity. Our unique dual collet slip design offers bi-directional pressure and force maintenance while a one piece inner mandrel provides upper and inner bore sealing, eliminating the need for PBR or setting sleeve integral seals when used with our Tie Back Nipple.

Designed with simple operation in mind, zero set down weight is required for setting, while a single downward movement engages the soft release allowing slips and seal mechanisms to release for easy extraction out of the well.

Wire Line Set

An available conversion kit allows the Ex-Track shear stud to release from the setting tool and adapter kit, converting the Solace to a conventional electric line setting tool.

Coil Tubing & Jointed Pipe

The Beast (hydraulic setting tool) combined with the Ex-Track (Setting/pulling Tool) are used to set the Solace. On retrieval, a soft release extension is supplied which is threaded to the Ex-Track tool. Stabbing into the Solace shears the soft release mechanism for easy pull and release with a secondary shear release.


  • Completely retrievable
  • Adaptable to Primary or Thermal Seals
  • Primary Seal rated to 10,000 Psi.
  • Thermal Seal rated to 600 F at 2,500 Psi.
  • Simple, short design accomodates for hole deviation.
  • Ratchet rings maintain seal stress as well as positive slip setting force
  • Field adjustable shear setting
  • Robust Collet type slips w/ retainers for secure run in
  • Optional Internal PBR and One-Piece Mandrel
  • Drill in ready, capable of rotating liners into place when required
  • Can be installed bellow restriction (nipples)
  • Most special clearances and ID combinations available on request
  • One piece mandrel increases strength and pressure integrity
  • Engineered for conventional, hazardous or thermal applications
  • Soft set option with secondary shear release
  • Can be installed and retrieved by wireline, coiled tubing or jointed pipe
  • Metal on metal backup with secondary elastomer seal ensuring a complete seal


  • Straddling or hanging sand control liners across productive intervals
  • Tubing Patch
  • Pump Seating Nipple for slim hole completions
  • Check Valve
  • Blanking Plug
  • Down Hole Choke for injection or production independent of nipples
  • Production Packer c/w optional Tie Back to surface
  • Gravel Packing configured for:
    • one trip circulating gravel packs
    • one trip squeeze gravel packs (usuallyhigh dense)

Related Products

BluePack RH

Minimize costs with economical packers Designed for zonal isolation in vertical and deviated production and water injection wells, the BluePack RH...


The heavy duty Bully Liner Hanger Packer is a full-bore, hydraulically set hanger solution designed to effectively eliminate the problems associated...

Drop Shift Degradable Stage Tool

The Drop Shift Degradable Stage Tool (DST) is the next generation of monobore cementing operations. Using a unique design and specialized degradable...

Eco-X Liner Hanger

Simple to install and fully hydraulic, the Eco-X Hydraulic Liner Hanger requires no setting tools. Maximum radial holding capacity virtually...

Eco-X Open Hole Packer

The Eco-X is a cost effective full bore open hole packer deployed as part of multi-stage stimulation.Positioned between two stages, the Eco-X...


Steelhaus’ JUGGERNAUT Cementable Rotatable Liner Top Packer is a heavy duty, reliable and cost-effective mechanical set, hydraulic release (with...


Simplify conventional completions, economically Optimize your single-string completions with the MRP conventional modular packer, which was designed...


Optimize isolation in ESP and gas injection wells Designed for production applications, the MRP-ESP modular dual-completion packer is designed to...


Isolate segments in single- and multizone intelligent completions Designed for intelligent completions, the MRP-MP modular multiport packer series...


Run in rapidly to save on rig time Designed for use as a production, gravel-pack, sump, or isolation packer, the QL conventional sealbore packer is...

Quantum Packer

Improve reliability in sand control operations. Designed for single-trip sand control applications, the QUANTUM gravel-pack packer is used to...

RHINO Packer

The RHINO is a cost effective retrievable casing packer deployed as part of multi-stage stimulation geared towards re-completions.Positioned between...

Saltel Expandable Steel Patches

Saltel expandable steel patches are a permanent solution to repair a zone of damaged tubing or casing, shut off unwanted perforations, seal a...

Saltel Xpandable ECP

Seal the annulus even in ovalized boreholes Saltel Xpandable ECP cementing operations external casing packers are robust expandable stainless steel...


Designed for operation in conventional, extreme, high pressure and thermal environments up to 600 F, the Solace has been engineered for the most...


The Sole Thermal Liner Top Seal is a dynamic, durable, and field proven packer that is reliable and robust. Used in applications where the liner is...

Tuff Torque

Stands up to the most demanding environments Built tough and designed to last, the Tuff Torque Shear Sub allows up to 10,000 ft-lbs of torque to be...


Test and isolate intelligent completion segments Designed for use in intelligent completions, the XMP premium multiport production packer is a...


Steelhaus’ Debris-less Casing Floatation Device is a market first, reliable, low risk tool for floating the liner to depth in long lateral...