DTS/DAS Fracturing Sleeve

Enhances wellbore data

The DTS/DAS Fracturing Sleeve is built on the same solid foundation as our proven Precision Re-Closable CT hydraulic fracturing sliding sleeve technology. 

Engineered as an effective means to provide real-time data feedback to the operator, the DTS/DAS distributed fiber optic sensing is offered as a way to add valuable data during stimulation and the remaining life of the well.

Selective sleeve activation

This robust fracturing system was constructed for use in cemented or open-hole environments. Designed to allow operators to perform selective single-point multistage fractures, the sleeve is a two-position, fullbore, fracturing sleeve designed for high-pressure and high-rate fractures.

The inner sleeve can be run using a pinned configuration and is sheared when desired, providing positive indication the specified port has opened before fracturing. In addition, the sleeve utilizes an adjustable detent locking system that locks the sheared sleeve to prevent accidental manipulation. The sleeve is opened using our CT fracturing sleeve shifting tool.

One of the shortest sleeves available, at under 3 feet, DTS/DAS sleeves do not require the use of pup joints and can be pre-bucked on casing or even installed on the rig floor. This sleeve system allows for safer handling at the well-site, easier installations, even in wells with moderate dog leg severity, and ultimately, improved efficiency in the completion of the well.

Reliable data protection

Engineered to provide reliable protection, the DTS/DAS channel protects the data cable as it is run and cemented in place. Offering 2’ length protection and 45o radial protection from induced erosion, the channels are designed to allow near 360o coverage during frac initiation.

Positive sleeve actuation

The shifting tool that actuates the sleeve is compact (2.5 ft long [0.8 m]), featuring a self-centralizing design with a 10,000-psi [69-MPa] pressure rating, and individual hydraulically controlled key sets ensure maximum performance during actuation up to 35,000 lbf [155,687 N] of over-pull without releasing from the sleeve unless desired.

The shifting tool has been engineered as a fracture-in-place solution with no requirements for isolation or related service tools, even after hundreds of stages are fractured. The fully compartmentalized and hydraulically balanced design with multiple layers of solids control ensures that no solids will interfere with the tool’s operation.

Fail-safe operation

The shifting tool, in combination with the cemented fracturing sleeves’ adjustable shear pinned sleeve option, provides operators with reliable surface indication of when a sleeve has shifted open, determined by positive indication on the weight indicator combined with the release of the shifting tool. The shifting tool is designed to release from the sleeve when actuated, only once the sleeve has shifted, or once the operators have stopped pumping.


  • Real-time data feedback
  • Simplifies rig operations
  • Enables reliable zonal shutoff
  • Recommended for re-closable operations


  • Sleeve for cemented and openhole completions uses CT to open and close sleeves
  • DTS/ DAS channel provides 2’ length and 450 radial protection from induced erosion
  • Large flow port area ensures access to fracture planes
  • Fullbore has no effect on cementing or reentry for subsequent stimulation
  • Reliable shifting tool technology provides positive sleeve actuation
  • Shifting tool is fail-safe opening and closing; only releases if the operator stops pumping or if the sleeve shifts
  • Short length of sleeve facilitates handling and installation
  • Short valve sleeve travel ensures long term manipulation


  • Cemented multistage stimulation with single-entry fracture placement
  • Openhole multistage stimulation, deployed with openhole packers
  • Where Real Time Data Feedback is desired

Related Products

Copperhead and Copperhead Extreme

Minimize risks of presetting and plug movement during multistage fracture stimulation. Isolate zones during multistage plug-and-perf fracture...

Copperhead Plug Mill

Save time on frac plug milling with a fit-for-purpose tool. The Copperhead plug mill can remove all Copperhead drillable bridge and frac plugs in a...

P3T Tool

Essential FRAC Data Measurement An integral component of the Precision System, the P3T Tool is designed to measure push, pull, pressure and...


The Multistage BurstPort system uses pressure activated ports that are opened in conjunction with a CT cup type straddle packer and our Jackal...

CoilShift Precision

The CoilShift Precision System is field proven over thousands of wells and tens of thousands of stages. It is simply the most reliable frac system...


The Cyclone Toe Initiation Port is designed to provide an economic means to initiate communication with the reservoir.Usually placed at the toe of...

Cyclone II

Rugged and durable, the Cyclone II provides an economic means to perform multiple pressure tests on the completion string and initiate communication...


COMPLETE PROFILE CONTROL The DropShift System was designed to work with our industry leading Harrier shifting tool and Eco-X packer. After mill out,...

Dropshift Open Only

The DropShift Lite Ball Actuated Open-Only Frac Port is a Cost Effective universal ball-actuated frac valve and a vital component of open hole liner...

DTS/DAS Fracturing Sleeve

The DTS/DAS Fracturing Sleeve is built on the same solid foundation as our proven Precision Re-Closable CT hydraulic fracturing sliding sleeve...


DuBall is a new revolution in Ball Drop Systems.Engineered from the ground up Deployed in open hole wells with isolation packers, DuBall delivers...

Eco-X Open Hole Packer

The Eco-X is a cost effective full bore open hole packer deployed as part of multi-stage stimulation. Positioned between two stages, the Eco-X...

FracXion Micro

Reduce metal content for faster millout and minimal debris size. Accelerate your time to production with FracXion Micro fully composite frac plugs...

FracXion Unity

Fracxion unity integrated fully composite frac plug combines the advantages of the ultrashort fracxion micro fully composite frac plug with an...

Harrier Shifting Tool

The Harrier Shifting Tool is a revolutionary coil or tubing conveyed hydraulically actuated shifting tool designed to manipulate the complete line...

HyperHarrier Slimline Shifting Tool

Built on a foundation of success. Building on the field proven success of the Harrier, the HyperHarrier is an extraordinary new shifting tool...

Jackal Packer

The Jackal multistage packer was designed to overcome the various limitations of adapting commoditized production-style mechanical packers to the...

ReacXion Complete

The ReacXion Complete family represents thousands of testing hours, research and design to solve the universal problem of dissolvable plugs not...

Re-closable CT Fracturing Sleeve

The reclosable CT fracturing sleeve is part of a robust cemented or openhole fracturing system designed to allow operators to perform selective...