Precision Coil Frac yields massive results for Yangarra Resources

Two 2-mile wells, 172+ stages on one BHA per well, 4.3 minute average cycle times, while achieving 60 stages placed in 24 hours, with over 3400 plus high rate tons placed per well.

Continuous improvement of the Precision Coil Frac technology Partnership yields massive results in the Cardium.

 Two 2-mile wells, 172+ stages on one BHA per well, 4.3 minute average cycle times, while achieving 60 stages placed in 24 hours, with over 3400 plus high rate tons placed per well.


 

One of Steeelhaus core values is continuous innovation. To this end our customers will always be collaborative partners, and we rely on their feedback to drive improvement.

Lorne Simpson, Vice president of Yangarra Resources has extensive completions experience in the Cardium including running over 10,000 cemented coil frac sleeves in the Cardium. He has been an essential partner in the continued development of our Precision Coil Frac System.  This partnership recently culminated in a very successful 2 well project in the Cardium.

The program involved over 172 stages per well. Precision achieved several milestones including 60 stages in a 24 hour period, 2 ½ zones per hr for a full 24hrs. The lowest single cycle time of 3.1 minutes per stage with an average of 4.3 minutes total cycle time, and placement of over 3400 tons on a single BHA trip in each well.  Collectively, two 2 mile HZ wells, 347 high rate fracs placing 770 lbs of sand per foot were done in 7 frac days with one BHA per well.

Since Steelhaus’ first well with Yangarra in March 2018 Lorne’s input and involvement has directly contributed to Precision’s ongoing success. Cardium wells are unique and contain a myriad of challenges associated with long lateral length, fluctuating pressure conditions, faults and fractures.

The completion of 58 wells with over 7,000 Precision Coil Frac Sleeves ran for Yangarra since March 2018 provided many collaborative design iterations and trials between Steelhaus and Yangarra which helped improve the Precision Coil Frac System against erosion, cross-flow, and BHA degradation in some of the most challenging frac environments. Previously, sleeve and BHA erosion meant multiple BHA trips would be a reality faced by most service providers.  Steelhaus received a commitment from Yangarra, provided Steelhaus would address all learning opportunities before each new wellbore completion.  Both companies believe in continuous improvement and are committed to finding a single trip BHA solution for their wells.

Completions

Saltel Xpandable ECP

Saltel Xpandable ECP

Seal the annulus even in ovalized boreholes Saltel Xpandable ECP cementing operations external casing packers are robust expandable stainless steel devices designed to set at low pressures to achieve zonal isolation for primary, multistage, and off-bottom cementing...

XMP

XMP

Test and isolate intelligent completion segments Designed for use in intelligent completions, the XMP premium multiport production packer is a tubing-conveyed, hydraulic-set, retrievable packer with multiple bypass configurations for hydraulic control lines or...

MRP-MP

MRP-MP

Isolate segments in single- and multizone intelligent completions Designed for intelligent completions, the MRP-MP modular multiport packer series consists of tubing-conveyed, hydraulic-set, retrievable production and isolation packers for single- or multizone...

MRP-ESP

MRP-ESP

Optimize isolation in ESP and gas injection wells Designed for production applications, the MRP-ESP modular dual-completion packer is designed to enable feed-through and connection of chemical injection, gas vents, ESPs and accessories, and electric or hydraulic...

QL

QL

Run in rapidly to save on rig time Designed for use as a production, gravel-pack, sump, or isolation packer, the QL conventional sealbore packer is a wireline- or hydraulic-set permanent packer you can trust when running in at high speed to reduce rig time for...

MRP

MRP

Simplify conventional completions, economically Optimize your single-string completions with the MRP conventional modular packer, which was designed for use in vertical, deviated, or horizontal wellbores or in applications in which single or multiple packers are set...

BluePack RH

BluePack RH

Minimize costs with economical packers Designed for zonal isolation in vertical and deviated production and water injection wells, the BluePack RH retrievable hydraulic-set production packer combines a single-piece mandrel with an adjustable shear release value for...

Quantum Packer

Quantum Packer

Improve reliability in sand control operations. Designed for single-trip sand control applications, the QUANTUM gravel-pack packer is used to isolate well segments in single- and multizone completions. This hydraulic-set, retrievable sealbore packer is available in...

RHINO Packer

RHINO Packer

The RHINO is a cost effective retrievable casing packer deployed as part of multi-stage stimulation geared towards re-completions.Positioned between two stages in the re-completion, the RHINO creates isolation during stimulation. The number of intervals being...

Sole

Sole

The Sole Thermal Liner Top Seal is a dynamic, durable, and field proven packer that is reliable and robust. Used in applications where the liner is not required to be anchored and where thermal expansion is expected.High Temperature Isolation The seal is engineered to...

Bully

Bully

The heavy duty Bully Liner Hanger Packer is a full-bore, hydraulically set hanger solution designed to effectively eliminate the problems associated with setting and retrieving conventional Liner Hangers.The Bully’s reliability is provided by its Engineered SureSet™,...

Eco-X Liner Hanger

Eco-X Liner Hanger

Simple to install and fully hydraulic, the Eco-X Hydraulic Liner Hanger requires no setting tools. Maximum radial holding capacity virtually eliminates casing problems associated with heavy liner loads both in compression and tension and offers an impressive...

Solace

Solace

Designed for operation in conventional, extreme, high pressure and thermal environments up to 600 F, the Solace has been engineered for the most extreme deviated and undulated vertical and horizontal well applications.The proprietary design offers full 360 degree...

JUGGERNAUT

JUGGERNAUT

Steelhaus’ JUGGERNAUT Rotatable Liner Top Packer is a heavy duty, reliable and cost-effective mechanical set, hydraulic release (with CRT) or mechanical release (with RRT), high capacity, rotatable, liner-top packer hanger.Simple Operation An anti-preset mechanism...

Solace

Solace

Designed for operation in conventional, extreme, high pressure and thermal environments up to 600 F, the Solace has been engineered for the most extreme deviated and undulated vertical and horizontal well applications.The proprietary design offers full 360 degree...